M.Sc. Mohammed Raed
Assist. Prof. Dr. Israa Alesbe
Faculty Member of Mechanical Engineering Dept.
University of Technology- Iraq
This email address is being protected from spambots. You need JavaScript enabled to view it.
Israa alesbe 1978, Baghdad-Iraq, married, Female, B.Sc. Mechanical Engineering (2002), MSc – Mechanical Engineering / Aircraft Engineering, University of Technology, Baghdad-Iraq (2005), Ph. D. (CFD Specialty/ 2016) in Institute for Fluid Dynamics and Ship theory, Hamburg University of Technology TUHH, Germany. Interests in general, Programing, Thermodynamics, Heat transfer, and Numerical simulation and studies for engineering application and computational fluid dynamics (CFD). Society Memberships and Reviewer for more than 10 publications. Lecturer since 2012
PhD, Institute for Fluid Dynamics and Ship theory, Hamburg University of
Technology TUHH, Germany, 2017.
MSc, Mechanical Engineering, University of Technology- Iraq, 2005.
BSc, Mechanical Engineering, University of Technology- Iraq, 2000.
Heat transfer, CFD, Energy Renewable, programing nanofluid, wind turbine, solar energy
For BSc Level:
• Computer Science
• Programing
Many certificates of appreciation from
• The Minister of Higher Education.
• The President of the University of Technology-Iraq.
• The Head of the Mechanical Engineering Department University of Technology-Iraq.
Dr. Suhad Abdul Hameed R. Aljumaily
Mechanical Engineering Department
Asst Professor
This email address is being protected from spambots. You need JavaScript enabled to view it.
Asst Professor .Dr Suhad A. Rasheed Aljumaily received his Ph.D. (2007) in Mechanical Engineering from University of Technology- Iraq. She graduated from University of Technology - Iraq in 1988 and 1994 for his bachelor and master degrees. Currently, she is a faculty member in the Department of Mechanical Engineering, University of Technology- Iraq. Also, she has a position of a vice president of scientific affairs and higher education studies - University of Technology- Iraq. She authored and co-authored nearly papers published in high ranking prestigious international journals and conferences. His research fields focus on Heat transfer, Porous media ,fluid flow and renewable energy .
PhD, Mechanical Engineering, University of Technology- Iraq, 2007.
MSc, Mechanical Engineering, University of Technology- Iraq, 1994.
BSc, Mechanical Engineering, University of Technology- Iraq, 1988.
Heat transfer, Porous media ,fluid flow and renewable energy
• Energy conversion systems, ORC system, Turbines and expanders design and optimization, Micro and small-scale power system, Heat pipes, Complex flows, Heat and fluid flow & CFD simulations.
1. Numerical analysis to investigate the effect partially filled of porous media inserted in a square channel for different locations.
4. Effect of orientation on the natural convection heat transfer from a heated triangular prism embedded in porous media.
5. Study of the Immersed Depth on the Natural Convection Heat Transfer from a Heated Triangular Prism Embedded in Porous Media.
6. “Experimental Study of Forced Convection Heat Transfer through Porous Media inside a Rectangular Duct of Fully Developed Region”, IOP Conf. Series: Materials Science and Engineering 1076 (2021) 012073.
7.” Enhancement In Forced Convection Heat Transfer From A Heated Triangular Cylinder By Using Porous Media” , JMERD Vol. 44, No. 1, pp. 135-150,2021.
8. “EXPERIMENTAL AND THEORETICAL STUDY OF FORCED CONVECTION AROUND A CYLINDER EMBEDDED IN POROUS MEDIA” ,The Iraqi Journal For Mechanical And Material Engineering,Vol.20, No2,June 2020..
9. “Free Convection Heat Transfer Around a Cylinder Embedded in an Enclosure Filled with Porous Media” , NJES 23(1)51-60, 2020.
10. “Experimental Study of Forced Convection Heat Transfer Porous Media inside a Rectangular Duct at Entrance Region” , Journal of University of Babylon for Engineering Sciences, Vol. (27), No. (1): 2019.
11.”CONVECTION HEAT TRANSFER IN A CHANNEL OF DIFFERENT CROSS SECTION FILLED WITH POROUS MEDIA”, Kufa Journal of Engineering, April 2018
12.”Force Convection Heat transfer from a Different Cross Section Cylinder Embedded in Porous Media” NJES, Vol.20 No.3, 2017 pp.727-736. 8.”The Power Enhancement of a Mini-Gas Turbine by Adding Ethanol to the Compressor Inlet Air”.
13.”Experimental Investigation on the Emission Characteristics of a Dual – Fuel Micro Gas Turbine by Injecting Ethanol into Compressor Inlet Air”. January 2014 .
14.”Mixed Convection Heat Transfer in Saturated Porous Media Inside a Circular Pipe”,2006.
15.”The Influence of the Dual Injection on the Performance and Emission of Alcohol Fueled Diesel Engine”.
16.”Comparative Study of Some Methods in Heat Transfer Calculations throughout Walls and Roofs”,1994 .
For MSc Level:
renewable energy
For BSc Level:
Level 4: Air-Conditioning system design
Level 3: Heat transfer, Machines design
Level 2: Engineering drawing , Fluid mechanics and Thermodynamics
Many certificates of appreciation from the Minister of Higher Education and the President of the University of Technology.
Hassanain Mohammed Hussain
Mechanical Engineering Department
Asst. Professor
This email address is being protected from spambots. You need JavaScript enabled to view it.
PhD in Mechanical Engineering
Air-conditioning, Refrigeration, Heat Transfer
Prof. Dr. Qasim Abbas Atiyah
Faculty Member of Mechanical Engineering Dept
University of Technology- Iraq
This email address is being protected from spambots. You need JavaScript enabled to view it.
Asst. Prof. Qasim A. Atiyah received his Ph.D. (2007) in Mechanical Engineering from College of Engineering in University of Baghdad- Iraq. He graduated from University of Baghdad - Iraq in 1997 and 2000 for his bachelor and master degrees. Currently, he is a faculty member in the Department of Mechanical Engineering, University of Technology- Iraq. He authored and co-authored nearly 30 papers published in high ranking prestigious international journals and conferences. His research fields focus on Vibration, Control, Dynamics, Design, Smart material (SMAs &FGMs), and Stress Analysis.
PhD, Mechanical Engineering, College of Engineering, University of Baghdad- Iraq, 2007.
MSc, Mechanical Engineering, College of Engineering, University of Baghdad- Iraq, 2000.
BSc, Mechanical Engineering, College of Engineering, University of Baghdad- Iraq, 2007.
Vibration, Control, Dynamics, Design, Smart material (SMAs &FGMs), and Stress Analysis
1-Pose estimation of objects using digital image processing for pick-and-place applications of robotic arms. FS Hameed, HM Alwan, QA Atiyah.
Engineering and Technology Journal 38 (5), 707-718.
2-Aircraft lateral-directional stability in critical cases via Lyapunov exponent criterion. EN Abdulwahab, QA Atiyah, AT Abd Alzahra.
Al-Khwarizmi Engineering Journal 9 (1), 29-38.
3-Natural frequency and critical velocities of heated inclined pinned PP-R pipe conveying fluid. JH Mohmmed, MA Tawfik, QA Atiyah.
Journal of Achievements in Materials and Manufacturing Eng. 107 (1)
4-Modeling and analysis of a novel smart knee joint prosthesis for transfemoral amputation. SHH Kamel, MN Hamzah, QA Atiyah, SA Abdulateef.
IOP Conference Series: Materials Science and Engineering 1094 (1), 012109.
5-Dynamic response of inclined pipe conveying fluid under thermal effect
JH Mohmmed, MA Tawfik, QA Atiyah.
6-Effects of Geometrical and Material Properties on Vibrations of Double Beams at Different Boundary Conditions. Q abbas Atiyah, IA Abdulsahib
7-Effects of Internal Connecting Layer Properties on the Vibrations of Double Beams at Different Boundary Conditions. IA Abdulsahib, Q abbas Atiyah.
8-The Combining Effect of Inclination Angle, Aspect Ratio and Thermal Loading on the Dynamic Response of Clamped-Clamped Pipe Conveying Fluid. JH Mohmmed, MA Tawfik, QA Atiyah.
9-Obstacle Avoidance Method for Highly Redundant Robotic Arms.
FS Hameed, HM Alwan, QA Atiyah.
IOP Conference Series: Materials Science and Engineering 765 (1), 012017
10-Vibration Analysis of Uniform and Tapered Composite Beams with Embedded Shape Memory Alloy. Bager JA, Qasim A. Atiyah, Ammar S. Hameed.
Journal of University of Babylon for Engineering Sciences 27 (1), 82-93
11- Experimental and numerical study of the crack position and depth effects on natural frequencies of turbine blades. QA Atiyah, MR Falih
Journal of University of Babylon for Engineering Sciences 27 (3), 332-344
12- Determination of Optimum Welding Parameters for FSW AA2024-T351
Zuhair Altaher , Samir Ali, Qasim A. Atiyah.
Al-Khwarizmi Engineering Journal 11 (1), 51-64
13- Determination of Optimum Tool Design for FSW AA2024- T351
ZSAT Samir Ali Al- Rubaii , Qasim Abbas Atiyah
Engineering & Technology Journal 32 (Issue: 11 Part (A)), 2648-2657
14- Compressive forces influence on the vibrations of double beams.
QA Atiyah, IA Abdulsahib. Open Engineering 13 (1), 20220408
15- A novel design of smart knee joint prosthesis for above-knee amputees
SH Kamel, MN Hamzah, SA Abdulateef, QA Atiyah
FME Transactions 51 (2), 131-139
For PHD Level: Dynamics of Rotary Machines
For MSc Level:
Advanced Dynamics, Advanced Vibration, & Numerical Analysis.
For BSc Level:
Level 4: Automatic Control, Vehicle Control, & Air-conditioning System Control
Level 3: Machines Design.
Leve 1: Material Properties.
Many certificates of appreciation from the President of the University of Technology and the Head of Mechanical Engineering Department
