Research published in the scientific journals 2018
| No. | Published scientific researches for 2018 | Download here |
| 1 |
Ahmed Abdulnabi Imran, Nabeel Sameer Mahmoud, Hayder Mohammad Jaffal, "Numerical and Experimental Investigation of Heat Transfer in Liquid Cooling Serpentine Mini-Channel Heat Sink with Different New Configuration Models", Thermal Science and Engineering Progress 6 (2018) 128–139. |
 |
| 2 |
Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Hussain H. Al-Kayiem, Mohammad S. Nasif, Maymeen N. Reda. "Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow", IOP Materials Science and Engineering, 328 012030 (2018). |
|
| 3 |
Hussain H Al-Kayiem, Hasanain A. Abdul Wahhab, Elena Magaril, A. Rashid A. Aziz, "Performance and emissions investigation of a single cylinder diesel engine using enhanced blend biodiesel by nanoparticles", AIP Conference Proceedings,: 2035(1) (2018). |
|
| 4 |
Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Mohammed El-adawy, Mhadi A. Ismael, Firmansya, "Effect of Rotating Burner Rim on Flame Stabilization: Blow-off and Flash Back", International Journal of Engineering and Technology, 7(2018), 230-233. |
|
| 5 | Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Hussain H. Al-Kayiem, Mohammad S. Nasif, Mohammed El-Adawy, "Magneto-hydrodynamics of bubbly flow in horizontal pipe: New criteria through numerical simulation", AIP Conference Proceedings, 2035(1) (2018). | |
| 6 | Falah Alobaid, Wisa Abed Kattea Al-Maliki, Thomas Lanz, Martin Haaf, "Dynamic Simulation of a Municipal Solid Waste Incinerator", Energy 149 (2018) 230-249. | |
| 7 | Talib K. Murtaha, Hussein M. Salih, Ali D. Salman, "Transient Behavior Analysis for Solar Energy Storage in PCM-CFM Material Using Equivalent Heat Capacity Method as Storage Model", Al-Khawarizmi Engineering Journal, Vol. 14, No.2, Juna, (2018). | |
| 8 |
Wafa Abd Soud , Riyam Abdullah Dayaa, “Vibration Response of Free and Force Analysis of a Rectangular Plate” . Journal of University of Babylon for Engineering Sciences, Vol. (26), No. (8), ,298-308,(2018) |
|
| 9 |
Talib K. Murtadha, Hussien M. Salih, Ali D. Salman, "Transient Behavior Analysis for Solar Energy Storage in PCM-CFM Material Using Equivalent Heat Capacity Method as Storage Model", Al-Khwarizmi Engineering Journal, Vol. 14, No.2, June, P.P. 40- 57, 2018. |
|
| 10 |
Sadeq H. Bakhy, Enass H. Falieh, Mortada A. Jabbar, "The Mechanism Analysis of Underactuated Robotic Finger For Optimum Grasping Using Gradient Descent Method", Al-Nahrain Journal For Engineering Sciences NJES Vol.21 No.1, pp.118-126, 2018. |
|
| 11 | Sadeq Bakhy, Enass Flaieh, Mortad Jabbar, "An Experimental Study for Grasping and Piching Controls for an Underactuated Robotic Finger Using a PID Control", 2nd International Conference on Engineering Sciences, 2018. | |
| 12 | Sadeq H. Bakhy, Samir A. Amin, Fouad A. Abdullah, "Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60", Engineering and Technology Journal, Vol.36, Part A. No.10, 2018. | |
| 13 | Ahmed N. Alkhazraji, "Enhancement of Mechanical Properties and Handling Characteristic of Tire Rubber Using Different Percentage of Nano Aluminum Oxide and Carbon Black", International Journal of Nanoelectronics and Materials Vol.11, No.3, July 2018. | |
| 14 | Ali Alkhalaf, H. A. Refaey, Nabeh Al-durobi, E. Specht. “Influence of contact point treatment on the cross flow mixing in a simple cubic packed bed: CFD simulation and experimental validation”, Granular Matter (2018) 20-22. | |
| 15 | Kamyar Mohammadpour, Ali Alkhalaf, Eckehard Specht. “CFD simulation of cross-flow mixing in a packed bed using porous media model and experimental validation”, Computational Particle Mechanics (2018) | |
| 16 | Dr. Ahmed Adnan AL-Qaisy, Najmuldeen Yousif Mahmood, Rasha Mohammed Hussein “Study The Microwave Energy Effects On Mechanical Properties And Estimated Fatigue Life Of Aa7075-T6” Journal of Engineering and Sustainable Development Vol. 22, No. 06, November 2018 | |
| 17 | A A Zainulabdeen, N Y Mahmood, J H Mohmmed “The effect of polymeric quenching media on mechanical properties of medium carbon steel” IOP Conf. Series: Materials Science and Engineering 454 (2018) 012053 | |
| 18 | Ahmed A. Zainulabdeen, Jabbar H. Mohmmed, Najmuldeen Y. Mahmood “Effect of Annealing Treatment on the Anisotropy Behavior of Cold Rolled Stainless Steel 304 Sheets” Diyala Journal of Engineering Sciences, Vol. 11, No. 2, June 2018, pages 84-89 | |
| 19 |
Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, "Study the Effects of Microwave Furnace Heat on The Mechanical Properties and Estimated Fatigue life of AA 7075-T73 with Oil and salt solution Treatments"", The Iraqi Journal for Mechanical and Material Engineering, University of Babylon, Vol.26, No.1, 2018. |
|
| 20 |
Ahmed A. Shandookh, "Investigating the Effects of Microwave Furnaces Heat on the Mechanical Properties and Fatigue Life of AA6061-T6 Alloy", The Iraqi Journal for Mechanical and Material Engineering, University of Babylon, Vol.26, No.4, 2018. |
|
| 21 |
Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, " Investigation Microwave Furnace Effects on Mechanical Properties and Fatigue Life of AA 7075-T73 with Dry and Acid Treatments", Al-Khwarizmi Engineering Journal, 2018, Volume: 14, No. 2, June, Pages: 71-81. |
|
| 22 |
Ahmed A. Shandookh, Najmuldeen Y. Mahmood, Rasha M. Hussein " Study the Microwave Heat Energy Effects on Mechanical Properties and Estimated Fatigue life of AA7075-T6", Journal of Engineering and Sustainable Development, Vol. 22, No.06, Nov. 2018. |
|
| 23 |
Ahmed A. Shandookh, "Assembling a Smart Phone Controlled Surveillance Unmanned Quadcopter" International Conference on Engineering Technology and their Applications (IICETA), 8-9 May 2018. |
|
| 24 |
Shaker S. Hassan, Ahmed Adnan Shandookh, Omar Alaa Ihsan " Study the Effect of Using Different Bearing Types on the Vibration of Evaporative Cooler ", Al-Nahrain Journal for Engineering Sciences, 2018, Volume: 21 Issue: 4 Pages: 532-538. |
|
| 25 |
Sadiq Jaffer Aziz, Ahmed A. Shandookh, Rafeef Jumaa Salman, " Microwaves furnace heat effect on aluminum alloy 7075-T73 ", 2018 International Conference on Advance of Sustainable Engineering and its Application (ICASEA), 14-15 March 2018. |
|
| 26 |
Alobaid F, Al-Maliki WAK, Lanz T, Haaf M, Brachthuäser A, Epple B, Zorbach I. Dynamic simulation of a municipal solid waste incinerator. Energy 2018; 149 (2018) 230-249. |
|
| 27 |
Hasanain A. Abdul Wahhab, A. Rashid A. Aziz, Mohammed El-adawy, Mhadi A. Ismael, Firmansya “Effect of Rotating Burner Rim on Flame Stabilization: Blow-off and Flash Back”, International Journal of Engineering & Technology, 7 (3.17) (2018) 230-233. |
|
| 28 |
Hussain H. Al-Kayiem, Hasanain A. Abdul Wahhab, Elena Magaril, Abdul Rashid A. Aziz “ Performance and Emissions Investigation of a single Cylinder Diesel Engine Using Enhanced Blend Biodiesel by Nanoparticles”, 6th International Conference on Production, Energy and Reliability 2018. |
|
| 29 | Alaa Abdulhady Jaber, Robert Bicker, "Development of a Condition Monitoring Algorithm for Industrial Robots Based on Artificial Intelligence and Signal Processing Techniques", Internation Journal of Electrical and Computer Engineering (IJECE), Vol.8, No.2, 2018. | |
