| العدد |
البحوث العلميـــة المنشـــورة لعام 2017 |
التحميل هنا |
| 1 |
Shibly A. AL-Samarraie, Mohsin N. Hamzah, Imad A. Abdulsahib, “Active Vibration Suppression of Smart Cantilever Beam with Sliding Mode Observer Using Two Piezoelectric Patches”, Al-Khwarizmi Engineering Journal,Vol. 13, No. 1, P.P 50-55, 2017. |
 |
| 2 |
Mohsin N. Hamzah, Dr.Ammar S. Merza, Lamees Hussein Ali, Experimental and Numerical Investigations of Athletic Prosthetic Feet Made of Fiber Glass Reinforced Epoxy”, 1st IJRTESS – 2017 First International Conference on Recent Trends of Engineering Sciences and Sustainability, Baghdad 2017. |
|
| 3 |
Mohsin N. Hamzah, Sadeq H. Bakhy, Mujtaba A. Fliayyh, “Effect of Pin Shape and Rotational Speed on the Mechanical Behaviour and Microstructures of Friction Stir Spot Welding of Aa6061 Aluminum Alloy”, Al-Nahrain Journal for Engineering Sciences (NJES) Vol.20 No.1, pp.129 – 139, 2017. |
|
| 4 |
Shaker S. Hassan, Dr.Mohsin N. Hamzah, Raad M. Abed., “Comparison Between Ultrasonic and Laser Shock Peening Treatment on Fatigue Life Performance of Al-Alloy 7075”, Advances in Natural and Applied Sciences. 11(9); Pages: 159-165, 2017. |
|
| 5 |
Shaker S. Hassan, Dr.Mohsin N. Hamzah, Raad M. Abed., “Effect of Ultrasonic Peening Technique on Fatigue Life of 6061 Aluminum Alloy”, AL-Qadisiyah Journal For Engineering Sciences, Vol. 10, No. 2, 2017. |
|
| 6 |
Shibly A. AL-Samarraie, Mohsin N. Hamzah, Yasir K. Al-Nadawi, “Vehicle ABS control system design via integral sliding mode”, Int. J. Automation and Control, Vol. 10, No. 4, 2016. |
|
| 7 |
Bashar A Mohammed, Khalil I Abaas, Miqdam T. Chaichan, “Experimental Study of the Effect of Fuel Type on the Emitted Emissions from SIE at Idle Period” Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 1 Pages: 1-12, 2017. |
|
| 8 |
Hameed Shamkhi Al-Khazaali, Samir Ali Al-Rabii, Ahmed Naif Al-Khazraji, “Improvement of Dynamic Buckling Behavior of Intermediate Aluminized Stainless Steel Columns”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 1 Pages: 26-41, 2017. |
|
| 9 |
Orhan S. Abdullah, Experimental Study to the Effect of Natural Particles Added to Unsaturated Polyester Resin of a Polymer Matrix Composite”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 1 Pages: 42-49, 2017. |
|
| 10 |
Rasha Mohammed Hussein, “The Effect of Walled Nano-Carbon on the Physical, Thermal and Mechanical Properties of Epoxy”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 1 Pages: 69-79, 2017. |
|
| 11 |
Husam Ahmed Al-Warmizyari, Samir Ali Amin, Ahmed Naif Al-Khazraji, “The Effects of Long-Term Operation and High Temperature on Material Properties of Austenitic Stainless Steel Type 321H”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 2 Pages: 1-10, 2017. |
|
| 12 |
Miqdam T. Chaichan, Rasha Mohammed Hussein, Aida Mohammed Jawad, “Thermal Conductivity Enhancement of Iraqi Origin Paraffin Wax by Nano-Alumina”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 3 Pages: 83-90, 2017. |
|
| 13 |
Ahmed Naif Al-Khazraji, “Effect of optimal shot peening time on fatigue life for aluminium alloy 6061-T651”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 4 Pages: 1-11, 2017. |
|
| 14 |
Hussein M. H. Al-Khafaji, “Best Level of Parameters for a Critical Buckling Load for Circular Thin-Walled Structure Subjected to Bending”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 4 Pages: 12-21, 2017. |
|
| 15 |
Laith J. Habeeb, Fouad A. Saleh, Bassim M. Maajel, “Experimental Investigation Of Laminar Convective Heat Transfer And Pressure Drop Of Al2O3/Water Nanofluid In Circular Tube Fitted With Twisted Tape Insert”, International Journal of Energy Applications and Technologies, Vol. 4, Issue 2, pp. 73-86, 2017. |
|
| 16 |
Rasha Mohammed Hussein, “The Effect of Walled Nano-Carbon on the Physical, Thermal and Mechanical Properties of Epoxy”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 4 Pages: 69-79, 2017. |
|
| 17 |
Falah F. Al-Jabery, “Enhancement of Heat Exchanger Performance by Using Dimpled Tube”, Al-Khwarizmi Engineering Journal, Volume: 13 Issue: 4 Pages: 41-49, 2017. |
|
| 18 |
Ibtehal Abbas Sadiq, Sarah Saad Farag, “Non-Linear Free Vibration Analysis Of Composite Laminated Plates”, The Iraqi Journal For Mechanical And Material Engineering, Vol.17, No2, July 2017. |
|
| 19 |
Ekhlas Mohammed Fayyedh, Moayed R. Hasan, Ali Falah Mohammed, “The Combined Effect Of Rib With Tandem Large Eddy Break Up Devices On Flow And Heat Transfer Characteristic Of Turbulent Flow In Rectangular Duct: Part B ”, The Iraqi Journal For Mechanical And Material Engineering, Vol.17, No 1 Pages: 142-158, 2017. |
|
| 20 |
Hasanen Mohammad Hussain, Laith Jaafer Habeeb, Orhan Jalal Abbas, “Investigation on Solar Hybrid Cooling System with High Latent Cooling Load”, Advances in Environmental Biology, 11(4) , Pages: 24-36, April 2017. |
|
| 21 |
Ahmed Adnan AL-Qaisy, Sameh Fareed Hasan, Najmuldeen Yousif Mahmood, “Study the Effects of Microwave Furnace Heat on The Mechanical Properties and Estimated Fatigue life of AA2024-T3”, Journal of Engineering, Volume: 23 Issue: 10 Pages: 146-156, 2017. |
|
| 22 |
Ekhlas Mohammed Fayyedh, Moayed R. Hasan, Ali Falah Mohammed, “The Combined Effect of Rib with Single Large Eddy Break Up Devices on Flow and Heat Transfer Characteristic of Turbulent Flow in Rectangular Duct”, AlNahrain Journal For Engineering Sciences, Volume: 20 Issue: 1 Pages: 281-291, 2017. |
|
| 23 |
Ibtihal A. Mahmood, Mustafa Ziyara Shamukh, “Characteristics and Properties of Epoxy/Polysulfide Blend Matrix Reinforced by Short Carbon and Glass Fibers”, AlNahrain Journal For Engineering Sciences, Volume: 20 Issue: 1 Pages: 80-87, 2017. |
|
| 24 |
M. Hassan, D. Ghanim, N. B. Hamandy, “Experimental Investigation of a Temperature Change inside Pneumatic Cylinder Chambers”, AlNahrain Journal for Engineering Sciences, Volume: 20 Issue: 1 Pages: 1-4, 2017. |
|
| 25 |
Khaleel I Abass, “Iraqi Experiment in the Use of Alternative Fuel: A Review”, Saudi Journal of Engineering and Technology, Vol-2, Iss-4:171-184, 2017. |
|
| 26 |
Mohammed I. Mohsin, Dr. Zainab H. Naji, Ali A.A. Abaas, “Optimum Configuration of Cooling Tower – Overhead Wind Turbine for an Energy Recovery System”, Advances In Natural And Applied Sciences, Vol. 11, No. 3: 54-63, 2017. |
|
| 27 |
Khaleel I Abass, “The Impact of Various Surfactants on the Water-in-Diesel Fuel Emulsions”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 14, Issue 3 Ver. II, PP 41-47, 2017. |
|
| 28 |
Mohammed I. Mohsin, Zainab H. Naji, Ali A.A. Abaas, “Effect of Wind Turbine on the Performance of Cooling Tower of an Energy Recovery System”, Journal Of Applied Sciences Research, Volume 13, Issue 4, PP 27-36, 2017. |
|
| 29 |
Ahmed A Zain-Al-Abideen, Jabbar H. Mohmmed, Najmuldeen Y. Mahmood, “Evaluation the Mechanical Properties of Shot Peened TIG Welded Aluminum Sheets”, Journal of Engineering, Volume 23, No. 4, April |
|
| 30 |
Ahmed Naif Al-Khazraji, Samir Ali Amin, Husam Ahmed Al-Warmizyari., “Creep Strength Degradation for Austenitic Stainless Steel Type 321H Due to Long-Term Service”, Journal Of Applied Sciences Research, Volume 13, Issue 6, PP 26-33, 2017. |
|
| 31 |
Mustafa Ahmed Abdulhussain, “CFD Modelling of dissolved Salt/Water flow mixture nucleate pool boiling phase change through vertical bundle of holes”, International Journal of Computation and Applied Sciences IJOCAAS, Volume 3, Issue 3, December 2017 |
|
| 32 |
Alaa Abdulhady Jaber, Robert Bicker, “Wireless Fault Detection System for an Industrial Robot Based on Statistical Control Chart”, International Journal of Electrical and Computer Engineering (IJECE), Vol. 7, No. 6, pp. 3421~3435, December 2017. |
|
| 33 |
Miqdam T. Chaichan, Khalil I Abaas, Bashar A Mohammed, “Experimental Study of the Effect Fuel Type on the Emitted of Emissions from SIE at Idle Period”, Al-Khwarizmi Engineering Journal,Vol. 13, No. 1, P.P. 1- 12 (2017). |
|
| 34 |
Raid S Jawad, Khaleel I Abass, Ali A Al-Wailie, Dina S M Al-Zubaidi, “Dust effect on PV outcomes at five different sites around Baghdad”, Journal of Scientific and Engineering Research, 2017, 4(7):93-102. |
|
| 35 |
Khaleel I Abass, Dina S M Al-Zubaidi, Ali A K Al-Waeli, “Effect of pollution and dust on PV performance”, International Journal of Civil, Mechanical and Energy Science (IJCMES), Vol-3, Issue-4, July-Aug, 2017. |
|
| 36 |
Khaleel Ibrahim Abass, “Is Iraq Ready to Use Solar Energy Applications: A Review”, International Journal of Engineering Science Invention, Volume 6, Issue 10, PP. 27-42, October 2017. |
|
| 37 |
Abdul Sattar J. M.Hasan, Abdul Kadhim M. H. Hadi, Noora Saleh Ekaab, "The Effect of Using Castor Oil on the Pollutants Emission in a Continuous Combustion Chamber", Al-Nahrain Journal for Engineering Sciences (NJES), Vol.20 No.4, 2017 pp.937-944. |
|
| 38 |
Abdul AL-Kadhim M Hasan Hadi, Sardar Othman Qadir, "The Effect of Iraqi Liquefied Petroleum Gas (LPG) Addition to a Liquid Hydrocarbon Fuels on Emission of an Industrial Furnace Burner", Al-Nahrain Journal for Engineering Sciences (NJES), Vol.20 No.5, 2017 pp.1240-1247. |
|
| 39 |
Abdul Kadhim M. Hasan, Abdul Sattar Jawad M., Noora Saleh Ekaab, "Experimental Stady of Using Olive Oil And Biodiesel on Pollutants Emissions in the Continuous Combustion Chamber", Journal of Engineering and Sustainable Development, Vol.21, No.02, March 2017. |
|
| 40 |
Shaker S. Hassan, Dr. Mohsin N. Hamzah, "Fatigue Life Enhancement of Al-Alloy 7075 Under Combined Laser and Hydrofluoric Acid Interaction", The Iraqi Journal for Mechanical and Material Engineering, Vol.17, No3, Sept.2017. |
|
| 41 |
Ibtehal Abbas Sadiq, Haider Sami Abdul-ameer, "Free Vibration Analysis of Laminited Composite Plate Using New Higher Order Shear Deformation Plate Theory", The Iraqi Journal For Mechanical And Material Engineering, Vol.17, No3, Sept.2017. |
|
