analysis of stresses and forming processes

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

"B.sc in aeronautical Eng./ Baghdad university 1992.
M.Sc. in applied Mech./University of Technology 1997.
Ph.D. in forming /University of Technology 2006."

Stress analysis and forming proceses.

1-"Evaluation of Energy Stored in Torsion Bars Theoratically and Experimentally"",thesis submitted to the Machine and Equipment Eng. in a partial fulfillment of the requirements for the degree of master of science in mechanical Engineering /University of Technology. "

2-"Numerical Solution of Hydrodynamic and Elasto-hydrodynamic Lubrication in Cold Extrusion", thesis submitted to department of production and Metallurgy Eng. Of University of Technology in a partial fulfillment of the requirements for the degree of Ph.D of in production Engineering.

3-"Surface Roughness and Roundness Error Pridiction Models in Turning Low Carbon Steel ""in Al Kufa Eng. journal,Vol.3,No.2,2012. "

4-"Experimental Study and Numerical Simulation of Sheet Hydroforming Process for Aluminum Alloy AA 5652""in journal of university of Technology "

Strength of material,dynamics, statics,Eng.drawing,Mechanical Drawing,Design,Manufacturing processes,and aircraft structures.

Some honors or awards

"In 2006-2007 I graduated from the University of Technology / Iraq - Baghdad - as a mechanical engineer / general mechanic. Then I finished my master’s degree in applied mechanics in 2012 at the same university. I got my PhD in 2019."

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

"B.Sc (2006-2007) I graduated from the University of Technology / Iraq - Baghdad / general mechanic.
Then I finished my master’s degree in applied mechanics in 2012 at the same university.
I got my PhD in 2019."

Bio-mechanic, Design Analysis, Vibration, Friction Stir Welding

1-Shaker S. Hassan, Khadim K. Resan and, Akeel Zeki Mahdi,” Design and Analysis of Knee Ankle Foot Orthosis (KAFO) for Paraplegia Person” Engineering and Technology Journal 31 (8 Part (A) Engineering), 1521-1533, 2013.

2-Akeel Z. Mahdi , Samir A. Amin and Sadeq H. Bakhy,” Effect of Different Friction Stir Spot Welding Techniques on the Mechanical Properties and Microstructure of Aluminum AA2024-T3” Al-Nahrain Journal for Engineering Sciences NJES 22(2)117-123, 2019

3-Akeel Z. Mahdi, Samir A. Amin, and Sadeq H. Bakhy, “Influence of Refill Friction Stir Spot Welding Technique on the Mechanical Properties and Microstructure of Aluminum AA5052 and AA6061-T3” 3rd International Conference on Engineering Sciences, IOP Conf. Series: Materials Science and Engineering 671 (2020).

Vibration Lab. , Automotive Design

more than 10 of thank letters

I am a lecturer in Mechanical Engineering Department in University of Technology- Iraq. I have PhD in Computer Sciences/ Software Engineering. I am passionate about my work. Because I love what I do, I have a steady source of motivation that drives me to do my best.

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

"1999- B.Sc. in Computer Sciences from Computer Sciences/University of Technology- Baghdad- Iraq
2015- M.Sc. in Computer Sciences from Computer Sciences/University of Technology- Baghdad- Iraq
2018- PhD in Computer Sciences from Computer Systems/University of Pahang- Pahang- Malaysia"

Software Engineering- CPU Scheduling- Operating Systems- Simulation and Modeling

1-Maysoon A. Mohammed, "Queueing theory study of round robin versus priority dynamic quantum time round robin scheduling algorithms", 2015 4th International Conference on Software Engineering and Computer Systems, p189-p194 (ICSECS)

2-Maysoon A. Mohammed, "A proposed priority dynamic quantum time algorithm to enhance varying time quantum round robin algorithm", Int. J. Computer Applications in Technology, Vol. 54, No. 3, 2016

3-Maysoon A. Mohammed, "Multi-queue CPU process prioritization using a dynamic quantum time algorithm compared with varying time quantum and round-robin algorithms", International Journal of Computer Applications (0975 – 8887) Volume 134 – No.7, January 2016

4-Maysoon A. Mohammed, "CPU THREAD PRIORITIZATION USING A DYNAMIC QUANTUM TIME ROUND-ROBIN ALGORITHM", ARPN Journal of Engineering and Applied Sciences

5-Maysoon A. Mohammed, "CPU Burst Processes Prioritization Using Priority Dynamic Quantum Time Algorithm: A Comparison with Varying Time Quantum and Round Robin Algorithms", International Journal of Electrical & Computer Sciences IJECS-IJENS Vol:15 No:06

"Visual Basic Programming Language
FORTRAN Programming Language
MATLAB Programming Language
C++ Programming Language
AutoCad"

CPU Burst Processes Prioritization Using Dynamic Quantum Time Algorithm Compared with Varying Time Quantum and Round Robin Algorithms Nominated as best research in MUCET Conference in Malaysia

"1982 Bachelor of ME/Aeronautical MED UOT Baghadad
1996 Msc in ME/Power MED UOT Baghadad
2003 PhD in ME/Thermal MED UOT Baghadad"

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

B.Sc., M.Sc., Ph.D

Aerodynamics, Gas-dynamics, Gas Turbines, CFD, Aircraft Design

1-Effect of Direct Injection on the Aerodynamics Characteristics of Wing Airfoil with Backward Facing Step

2-Experimental and numerical study of enhancement heat transfer in twisted tubes heat exchangers

3-Modified Grid Clustering Technique to Predict Heat Transfer Coefficient in a Duct of Arbitrary Cross Section Area

4-Twist parameter Influence on Heat Transfer Coefficient Augmentation for a square Twisted Tube

5-Improving the Lift Characteristics of Supersonic Double Wedge Airfoil at Low Speed Using Passive-Active Flow Controlling Methods

6-Enhancement of Thermal Storage Properties of Phase Change Material by Using Metallic Swarf

"Thermodynamics I
Thermodynamics II
Gas-dynamics
Aircraft Design
Gas Turbines
Turbo-machinery"

Many thank and appreciation letters from the Minister of Higher Education & Scientific Research, President of UOT and Dean of MED.

"- B.Sc. in Mechanical Engineering / General since 2002
- M.Sc. in Mechanical Engineering / Thermal Power since 2005
- Ph. D. in Mechanical Engineering / Thermal Power since 2017
- Over than 13 years’ experience of university teaching many subjects including:
-- Engineering and Numerical Analysis, 3rd class
-- Numerical Analysis with MATLAB, 3rd class
-- Air Conditioning Engineering Tutorial, 4th class
-- Engineering Drawing Tutorial, 1st class
- Mechanical Engineering Laboratories including: Refrigeration and Air Conditioning, Gas Dynamics, Engineering Mechanics, Electrical, Vibration. "

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

"2002 - B.Sc. in Mechanical Engineering/ General from Mechanical Engineering Department / Al- Nahrain University – Baghdad - IRAQ.
2005 - M.Sc. in Mechanical Engineering /Thermal Power from Mechanical Engineering Department / Al-Nahrain University – Baghdad - IRAQ.
2017 - Ph.D. in Mechanical Engineering /Thermal Power from Mechanical Engineering Department / University of Technology – Baghdad - IRAQ.
"

Heat Transfer, Heat Exchangers, CFD Simulation, Computational Fluid Dynamics.

1-Osama B. Ahmed, “Effect of Dust Mass Ratio on Orifice Performance in Two Phase Flow”, M.Sc. Thes. Al-Nahrain University, Baghdad-Iraq,2002.

2-"Osama B. Ahmed, “Investigation of Heat Transfer Performance of Shell and Twisted Tube Heat Exchanger” Ph.D. Thes. University of Technology, Baghdad-Iraq,2017. "

"Engineering and Numerical Analysis.
Numerical Analysis with MATLAB.
"

"• Certificate of Attendance,"" Maximize Revenue by the Art of Selling & Marketing Workshop"", United Skills/Business Skills Development and Consulting, JORDAN, 2006.
• TOFEL ITP Certificate, 2010.
• IC3 Certificate/Information Technology Center/ University of Technology – Baghdad – IRAQ, 2010.
• Certificate of Attendance, "" INTERNET "" / Al-Nahrain Center, Baghdad-IRAQ, 2004.
"