Research published in the scientific journals 2019
| No. | Published scientific researches for 2019 | Download here |
| 1 |
Laith Al-Sadawi, Tze Pei Chong, Jung-Hoon Kim, "Aerodynamics Noise Reduction by Plasma Actuators for a Flat Plate with Blunt Trailing Edge", Journal of Sound and Vibration 439 (2019) 173-193. |
 |
| 2 | Nawfal M. Ali, Dr.A.K. Abdul Hassan, Dr. Sattar Aljabair, "Effect of Conventional Multistage Savonius Wind Turbines on the Performance of teh Turbine at Low Wind Velocity", Jour of Adv Research in Dynamical & Control System, Vol.11, No. 11, 2019. | |
| 3 | Nawfal M. Ali, Dr. Sattar Aljabair, Dr.Abdul Hassan A.K., "An Experinmental and Numerical Investigation on Darrieus Vertical Axis Wind Turbine Types at Low Wind Speed", International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol.19 No.06, December 2019. | |
| 4 | Wafa A. Soud , |Ihsan A. Baqer , Mohammed R. Ahmed ,“Experimental Study of 3D Printing Density Effects on the Mechanical Properties of the Carbon-Fiber and Polylactic Acid Specimens” Engineering and Technology Journal Vol. 37, Part A. No. 04, 2019,128-132. | |
| 5 | Anwar S. Barrak, Ahmed A.M. Saleh, Zainab H. Naji, "An Experimental Study of Using Water, Methanol, and Binary Fluids in Oscillating Heat Pipe Heat Exchanger", Engineering Science and Technology, an Internationl Journal, 2019. | |
| 6 | Akeel Z. Mahdi, Samir A. Amin, Sadeq H. Bakhy, "Effect of Different Friction Stir Spot Welding Techniques on the Mechanical Properties and Microstructure of Aluminum AA2024-T3", Al-Nahrain Journal for Engineering Sciences NJES 22(2), 117-123, 2019. | |
| 7 | Najmuldeen Yousif Mahmood, Ali Hussein Alwan “Mechanical properties improvement of MIG welding steel sheets using Taguchi method” Australian Journal of Mechanical Engineering (2019) | |
| 8 | Moayed R.Hasan, Suhad A.Rasheed, Ali Najeh Mahdi, "Experimental Study of Forced Convection Heat Transfer Porous Media inside a Rectangular Duct at Entrance Region", Journal of University of Babylon for Engineering Sciences, Vol. (27), No. (1): 2019. | |
| 9 |
Qasim Abbas Atiyah, Ammar Saleem Hameed, Baqer Jabbar Assi, "Vibration Analysis of Uniform and Tapered Composite Beams with Embedded Shape Memory Alloy", Journal of University of Babylon for Engineering Sciences, Vol. 27 Iss.1, 82-93, 2018. |
|
| 10 |
Qasim Atiyah, Hasan M. Alwan, Firas hameed, "Novel approach to solve the inverse kinematics problem for a multi degree of freedom robotic arm", Journal of engineering and applied sciences, Vol.14, Iss.13, 2019 (4617-4624). |
|
| 11 |
Qasim Abbas Atiyah, Mustafa Rahman Falih, "Experimental and Numerical Study of The Crack Position and Depth Effects on Natural Frequencies of Turbine Blades", Journal of University of Babylon for Engineering Sciences, Vol.27, Iss.3, 2019(332-344). |
|
| 12 |
Noora Salih Ekaab, Noor Hussein Hamza, Miqdam T. Chaichan, "Performance and Emitted Pollutants Assessment of Diesel Engine Fuelled with Biokerosene", Case Studies in Thermal Engineering 13, 2019 100381. |
|
| 13 |
Ali Hussein Alwan, “Modeling of Bending Properties of Stainless Steel 304 Sheets Welded by Tungsten Inert Gas Welding Process” Al-Khwarizmi Engineering Journal, Vol. 15, No. 4, P. P. 10- 22, 2019 |
|
| 14 |
Samir Ali Amin Al-Rabii, Lamyaa Mehdi Assad, and Ali Hussein Alwan, “Study the Influence of Gas Pressure on the Tensile Behavior of TIG Stainless Steel Sheets” Journal of University of Babylon for Engineering Sciences, Vol. (27), No. (3): 2019. |
|
| 15 | Alla Abdulhady Jaber, Ahmed A. M. Saleh, Hussein Fouad Mohammed Ali “ Prediction of Hourly Cooling Energy Consumption of Educational Building Using Articial Neural Network”, International Journal on Advanced Science Engineering Information Technology, Vol.9 (2019) No.1. | |
| 16 |
Ali Ayyed Abdul-Kadhim, Fue-Sang Lien, Eugene Yee “GPGPU Implementation of a Lattice Boltzmann Methodology for Praticle Transport and Deposition in Complex Flow”, Internaional Journal of Numerical Methods for Heat and Fluid Flow, 2019. |
|
| 17 |
Ahmed A. M. Saleh, “Correlation of Overall Heat transfer Coefficient in The Three Zones of Wire and Tube Condenser”, Journal of Mechanical Engineering Research and Developments, 42(1)b(2019) 100-107. |
|
| 18 |
Ahmed Abed Mohmmed, Raed Ayad Abduljabbar, “Theoretical Study of the Novel Control Strategy of Hybrid Solar Air Conditioning System”, The 10th International Renewable Energy Congress (IREC 2019). |
|
| 19 |
Ahmed Abed Mohmed Saleh, Sarmad Salam Abdulrasool Talib “Mathematical Modeling of Novel Indirect-Direct Evaporative Cooling unit”, ARPN Journal of Engineering and Applied Sciences, Vol.14, No. 9, May 2019. |
|
| 20 |
Mustafa Ahmed Abdulhussain “ Study of Plate Heat Exchanger Performance Working With Three Types of Refrigerants Exposed to Hot Air Flow”, Twelve International Conference on Thermal Engineering: Theory and Applications, 2019, India. |
|
| 21 |
Humam M., Mustafa A. abdulhussain “Drag Investigation Around A Cylinder and Symmetric Airfoil in Trandem With Different Gaps and Angles of Attack”, Journal of Mechanical Engineering Research and Developments, 42(1) (2019) 26-33. |
|
| 22 |
Mahir Faris Abdullah, Humam kareem, Rozli Zulkifli, Zambri Harun, Shahrir Abdullah, Wan Aizon, W. Ghopa “Heat Transfer and Flow Structure of Multiple Jet Impingement Mechanisms on a Flat Plate for Turbulent Flow”, International Journal of Mechanical & Mechatronics Engineering, Vol:19. No:03, 2019. |
|
| 23 |
H.A. Abdul Wahhab, M.A. Mashkour, S.A. Madodi “Investigation of Water-Diesel Emulsion Characteristics using Optical Technique”, Journal of Applied Fluid Mechanics, Vol. 13, No. 1, pp.349-355, 2020. |
|
| 24 |
Muna S. Kassim, Wajeeh Kamal Hasan, Hasanen Mohammed Hussen, Laith jaafer Habeeb “Experimental and Numerical Study in Horizontal Tube by using Swirl Device”, Journal of Engineering and Applied Sciences 14(14): 4905-4918, 2019. |
|
| 25 | Alaa Abdulhady Jaber, Firas Khalil Ibrahim Al-Mousawi, Hayder Sabeeh Jasem, "Internet of Things Based Industrial Environment Monitoring and Control: a Design Approach", International Journal of Electrical and Computer Engineering (IJECE), Vo.9, No.6, December 2019, pp. 4657-4667. | |
| 26 | Alaa Abdulhady Jaber, Khalid Mohsin Ali, "Artifical Neural Network Based Fault Diagnosis of a Pulley-Belt Rotating System", Internation ournal on Advanced Science Engineering Information Technology, Vol.9, No.2, 2019. | |
